You are here :: Lugarde Factory Painting

Lugarde Factory Painting

 << Back to Lugarde Range
 
 
LUGARDE DOUBLE GLAZED BUILDINGS
 
 
 
FACTORY PRE-TREATMENT AND PAINTING
 
Your prima or pro-system building or veranda pre-treated and fully painted!
 
(not possible with the log cabin system - see below for more info *)
 
 
If you choose this option then we will Pre-treat the entire inside and outside with a colourless treatment, including the parts which are unreachable after assembly.
 
After this treatment, we will Paint the entire outside walls of your Prima or Pro-System building in the
colour chosen by you.
 
The walls under the canopy will be painted on the outside as well. The inside will be treated with the colourless base. If you want to paint this with the same colour, then you can order the paint together with your building.
 
With this treatment your building is protected for 2 to 3 years. Optimal results and a perfect finish can be achieved by sanding down lightly and treating with 1 more coat after assembly. If this is done, then the building is protected for 4 to 5 years. If you are planning to do this, then please do not forget to order the additional paint together with your building.
 
Windows and doors are painted with 3 coats at the factory.
 
The windows and doors take a lot of work to paint properly, so the extra cost of having them
pre-painted is well worth it in our opinion.
 
Pre-treatment/painting is surprisingly inexpensive, please ask for a quotation.
 
* For Log Cabin system buildings we can offer the doors and windows pre-painted, and although factory painting for walls etc. is not possible for log cabins, we can offer a spray colour treatment, or pressure treatment.

Colours available -
 
  • RAL 9010 Pure White
  • RAL 7024 Graphite Grey
  • RAL 7001 Silver Grey
  • RAL 7037 Dusty Grey
  • RAL 6013 Reed Green
  • Transparent Oak
RAL 9010 Pure White RAL 7024 Graphite Grey RAL 7001 Silver Grey
RAL 7037 Dusty Grey RAL 6013 Reed Green Transparent Oak
 
 
Your building will be treated with Remmers products. Remmers products are the perfect protection against UV radiation, water and fungi, and contain anti-fouling protection as well. Products are water-based and are therefore an environmentally conscious choice.
 
You can choose the same or a different colour for each of these areas, or you can choose just one area.
  1. Windows and doors
  2. External walls and/or fascias
  3. Posts and/or fascias
 
Example -
 
  1. Windows and doors - RAL 9010 Pure white
  2. External walls and/or fascias - RAL 6013 Reed Green
  3. Posts and/or fascias - RAL 9010 Pure white
or
  1. Windows and doors - RAL 9010 Pure white
  2. External walls and/or fascias - RAL 7037 Dusty Grey
  3. Posts and/or fascias - RAL 7001 Silver Grey
 
   


 
   
     
     
 
 
 
 
 
 
 
NAVIGATION
 
 
<<< Back to Home Page
 
 
CONTACT US 

0845 017 08 54 (Lo-Call - leave message)

07931 363227 (mobile)

 
Back to Top
Oct 22, 2017

Back to Top